PORSCHE 997 TURBO GERMAN
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2007-09 (includes uncategorized and accessory items)
The differences are day? And night!
Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don?t quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself.
In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions.
The daytime difference (the competition):
Darker, more yellow appearance
Raised orange warning lights, not flush
Larger, bolder script...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Mahle 4.1 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.1:1 compression. - 106 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. Water channels and case must be machined to fit. Please add the following to your order: 2 qty. Base gaskets, part # FVD10303905zfd 2 qty. Head gaskets, part # FVD10303905zkd 1 qty. O- ring base set, part # FVD10303905or 1 qty. O- ring head set, part # FVD10303905oro *please note: horsepower and torque gains depend on the softwa...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 TURBO/GT2 2001-05
From $8,474.70
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
* precision manufactured complete shift lever bracket. Shorten the shift throw 25%. Perfect switching operation.
Made in Germany.
Fits: GT3, 3.8l, 320kw (10-), 3.6l, 305kw (07-09), turbo, 368kw (10-), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.4l, 235 kw (09-), 2.9l, 195 kw (09-), s 3.4, 217 kw (06-08), 2.7, 180 kw (07-08), 228 kw (09-), 188 kw (09-), 3.4, 217 kw (07-08), 3.2, 206 kw (05-06), 176 kw (05-06), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-02), 2.5 (97-99)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $288.20
Make a selection
Genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,0:1 max. Power - 390kw (530hp) @ 6500rpm max. Torque - 680nm (502lbf ft) @ 2200-4500rpm max. Speed - 329km/h max. Rpm - 6800rpm acceleration 0-100km/h - 3.7s tuning: max. Power - 449kw (610hp) @ 6500rpm max. Torque - 780nm (575lbf ft) @ 4500rpm max. Speed - 340km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.4s FVD dme / ecu programming philosophy: for more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly r...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $7,602.10
Make a selection
Led tail lights with integrated brake, fog, reverse and indicator light
- euro-approved (homologation).
- led tail light for 2005 to 2008 997.1 models.
- compatible with on-board computer*
*the canbus units are integrated into the tail light, modifications are not necessary (plug and play).
You may experience condensation with these lights. However the lights are specially designed to protect against the effects of condensation.
A frequently disputed issue is fogged glasses inside the lights, this has been around since the early 911, 964, etc. This effect occurs after driving in rain or cold nights, and is a normal physical process. Through the light vents the expanding heated air gets discharged...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 507kw (690hp) @ 6500rpm
Max. Torque - 870nm (642lbf ft) @ 4500rpm
Max. Speed - 350km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$19,415.07
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 426kw (580hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,923.90
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 449kw (610hp) @ 6500rpm
Max. Torque - 780nm (575lbf ft) @ 4500rpm
Max. Speed - 340km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,643.24
Make a selection
Gurtrohr nur in verbindung mit bügel/käfigneubestellung möglich
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-02), 2.5 (97-99), 968cs (93-95), 968 (92-95), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 1997-04 968 1992-95 911 1989-94 CAYENNE 2007-10 CAYENNE 2003-06 944 1982-85 944 1985-88 928 1992-95 924 1980-85 914 1970-76 911 1970-73 356 1960-65
Stainless steel brake hoses are the best way to transmit hydraulic pressure from your foot to your brake calipers with maximum efficiency and durability. When you step on the brakes with normal rubber brake hoses they first start to expand before you achieve maximum stopping power, resulting in a spongy feel.
Our stainless steel brake hoses do not expand, therefore eliminating the spongy feel and providing you with a solid brake pedal and maximum stopping power.
Our brake hose set contains:
4 x stainless steel brake hoses
1 x installation instructions
1 x tÜv-certificate
When replacing the brake hoses, the brake fluid must be replaced!
Fits: GT3 rsr 3.8l 342kw (07-10), GT3 cup 3.6l (05-07), g...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $169.40
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
These wide body carbon & kevlar® fenders are 1 inch (25mm) wider than the factory fenders. They are perfect for the street or track and are designed to work with the factory bumper, inner fender liner and gas filler door.
- German made
- 1 inch wider than the OEM fender
- high quality
- weight 5.5 lbs. (2.5 kg) kevlar and carbon mix for added stiffness.
- primed for paint.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$2,171.56
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Roof skin for racing cars
- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon mat
- adhesive mounting technology
Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.
Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300kw (10-), c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$3,518.90
Make a selection
These wide body carbon & kevlar® fenders are 1 inch (25mm) wider than the factory fenders. They are perfect for the street or track and are designed to work with the factory bumper, inner fender liner and gas filler door.
- German made
- 1 inch wider than the OEM fender
- high quality
- weight 5.5 lbs. (2.5 kg) kevlar and carbon mix for added stiffness.
- primed for paint.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$2,003.97
Make a selection
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
Mahle 3.8 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets with 23 mm wrist pin. - slip fit, steel (st52) cylinders. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.4:1 compression. - 102 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. *please note: horsepower and torque gains depend on the software used, camshafts, crankshaft and other internal modifications. 700+ hp and torque can be achieved with use of these pistons and cylinders with a proper engine build and software. Contact your sales person for ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$14,654.60
Make a selection
Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers for more than 30+ years has many advantages. We are able to source this flywheel from an elite German motorsports manufacturer who delivers the highest quality available. Features: quicker acceleration 9 bolt scalloped design precision machined billet steel computer balanced made in Germany replacement for original number 93010220201 sold individually. 1 necessary per car. Please note: this only fits 930 turbo models from 1978-79.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call t...(choose a part on the right to read more)
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|